witch bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 51.39x161.44mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamen