MakerWorld
Hueforge & Lithophane
Torment
by Corp
20
Downloads
33
Likes
8
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmiss
Sign in to leave a comment
Sign in