MakerWorld
Hueforge & Lithophane
Tesla
by Naltz
32
Downloads
10
Likes
5
Makes
Project: TeslaPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Swap Instructions: Start with Red At layer #11 (0.96mm) swap to White for the rest.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in