Samurai - Hueforge

NO AMS, 3 COLOR.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 116.24x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 1.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm)