Back
325x325x.2 first layer check
printables · Test Models

325x325x.2 first layer check

Download Model
by Crafty_Ham
8 Downloads
1 Likes
0 Makes
0 Kommentare
calibration tuning corexy calibrationtest firmware qidi qiditech klipperfirmware qidixmax3 freedi
Filament Friendly first layer/XY position check, hollow 325x325x.2 with 10mm boarder.
Category
Test Models
Source
Printables
Published
23.02.2025
Updated
23.02.2025

Similar Models

6 Vorschläge
Print in Place Tolerance Test
Print in Place Tolerance Test
by Windrose
Ender 3 NG - calibration cube V2
Ender 3 NG - calibration cube V2
by RH3D
Stew's "Good Enough" Calibration Cross for the Qidi Plus 4
Stew's "Good Enough" Calibration Cross for the Qidi Plus 4
by stew675
25 mm Calibration Cube – Accurate 3D Printer Test Block
25 mm Calibration Cube – Accurate 3D Printer Test Block
by Tim
Qidi Tech X-Plus 3 bed leveling
Qidi Tech X-Plus 3 bed leveling
by PantherPrints
Calibration Cylinder – 20×25 mm Dimensional Test
Calibration Cylinder – 20×25 mm Dimensional Test
by Tim