Breezy the Butterfly Flexi

STL/3MF Multicolor Regular eyes/ 6mm eye sockets   Print Settings: 2 parts - wings and body No Supports needed Arachne walls 2-3 walls 5-10% infill Test printed to 70% YMMV If you have adhesion issues, try a brim, glue stick or Aquanet hairspray   Add a teeny dab of glue on the flat base around the peg and peg sides, then push the body on. Try not to add too much as there are joints (leg) around this area. If it is too tight due to filament expansion, shave the peg down some.