Faucet knob cover

I don't know if I would make this again. I made it in PLA so it would match the acrylic sink knobs, but the shrinkage / variability of nozzle position / etc made it difficult to maintain consistency. I probably made this 4 or 5 times before I got the dimensions figured out.

A little hot glue might help, though.

Here are the settings that I used:

Temp: 200C
Build Platform Temp: 110C.
100% fill.
Nozzle location: Eyeballed to "close enough."

The color is from Sharpie marker that I