Thingiverse
Support bracket for Y idler on ToM
by 54weasels
4
Downloads
2
Likes
0
Makes
Derivative of http://www.thingiverse.com/thing:7022
When I printed out the original, everything worked OK (re-using the axis cap and all) but I was 3mm off somehow.
Didn't feel like messing around with the STL so I made it again in openscad.
The bolts are also a bit short, since they are supporting both this and the cap, but if you don't file down/drill out the holes more, they seem to actually support the bolts pretty well. If it comes off or starts to, I might change the design to have
When I printed out the original, everything worked OK (re-using the axis cap and all) but I was 3mm off somehow.
Didn't feel like messing around with the STL so I made it again in openscad.
The bolts are also a bit short, since they are supporting both this and the cap, but if you don't file down/drill out the holes more, they seem to actually support the bolts pretty well. If it comes off or starts to, I might change the design to have
Sign in to leave a comment
Sign in