Radio Shack 417 PCB Altoids Insert

Put your project in an Altoids case. This has blocks that hold the PCB and can be "melted" with a soldering iron or similar to keep the PCB in place. Also, there are 2mm holes that can be drilled out to your preference to use screws to hold the PCB in place. There is 3 mm of space under the PCB, ample room for wires and leads underneath.

Radio Shack still sells a general purpose PCB (part #276-150 http://www.radioshack.com/product/index.jsp?productId=2102845 ) that is very useful and for whi