Thingiverse
Extruder Heater+Nozzle Assembly; Single Material Port, Two Side Air Ports (Idea 20090531)
by clothbot
1
Downloads
6
Likes
0
Makes
This is a work-in-progress (not fabricated/prototyped yet), exploring how to design a CNC/laser cuttable extruder head assembly for Makerbot/CandyFab applications.
- Target material is 0.9mm thick steel/aluminum as provided by http://www.ponoko.com/
- Routed channels are 1mm or 2mm wide
- Bolt-holes are 2mm in diameter.
- The pieces are to bolt together, then heater wire wrapped around the indented sides.
- Material is fed from the top; air from the side ports.
- If a magnetic material
- Target material is 0.9mm thick steel/aluminum as provided by http://www.ponoko.com/
- Routed channels are 1mm or 2mm wide
- Bolt-holes are 2mm in diameter.
- The pieces are to bolt together, then heater wire wrapped around the indented sides.
- Material is fed from the top; air from the side ports.
- If a magnetic material
Sign in to leave a comment
Sign in