3D Printed CNC dust shoe

Here is my attempt at a Dust collection/vac setup for Nikodem Bartnik's 3D printed Dremmel CNC machine. (https://www.thingiverse.com/thing:3004773)

This is set up for a 1.25" hose (you can use bigger with an adapter ABOVE the clamp).

Be careful removing the supports from the upper unit as the part that slips over the Z axis is VERY VERY thin (by design). It probably will print only 1-2 layers thick (but that's enough...)

You WILL need to cut the locking nut of the dremmel down some to