ProtoX 5inch Quadcopter Frame

This is my new X frame for 5inch quads!

Here are a few notes:

-The back arms are raised by 1cm to make for cleaner airflow for the back motors.
-It's intended to be used with a 4in1 ESC but it should work fine even with normal ESCs.
You can mount the camera to the front brace.I designed it to fit my caddx sdr camera, so check your camera dimensions before printing it.
-You can choose to mount the battery on the bottom or the top.
-You will need 8 m3x20 screws and 4 m3x10 screws
-The h