Thingiverse
K40 Laser Stock Exhaust Fan Adapter
by 101LEDS
21
Downloads
7
Likes
0
Makes
An adapter for the stock fan packaged with 40W lasers.
It allows you to seal the opening (vhb tape and weatherstripping) to improve the amount of air it can move.
Has a 3.5" OD hookup for your stock hose without a fitting.
The 4 mounting holes will require slightly longer screws due to the added thickness, you will have to choose the size based on how much sealing material is used. 12mm worked for me.
The mounting holes will be close and may require reaming to line them all up based on how w
It allows you to seal the opening (vhb tape and weatherstripping) to improve the amount of air it can move.
Has a 3.5" OD hookup for your stock hose without a fitting.
The 4 mounting holes will require slightly longer screws due to the added thickness, you will have to choose the size based on how much sealing material is used. 12mm worked for me.
The mounting holes will be close and may require reaming to line them all up based on how w
Sign in to leave a comment
Sign in