Thingiverse
Titan Aero Prusa i3 MK2 Mount
by fabemit
187
Downloads
108
Likes
3
Makes
**Update: 26042017**
From comments that have been made it seems that not using the spacer and modifying the firmware
define Y_MAX_POS 195 // modified from 210 to 195
gives the correct / usable positioning.
All the other firmware modifications from below should still be used.
**Update: 29032017**
Deleted v1 mount.
19mm Rear Spacer Added. To account for Y-Axis Offset as per original, but may not be required.
You loose 20mm along the Y-Axis but gain 5mm along the Z-Axis. The
From comments that have been made it seems that not using the spacer and modifying the firmware
define Y_MAX_POS 195 // modified from 210 to 195
gives the correct / usable positioning.
All the other firmware modifications from below should still be used.
**Update: 29032017**
Deleted v1 mount.
19mm Rear Spacer Added. To account for Y-Axis Offset as per original, but may not be required.
You loose 20mm along the Y-Axis but gain 5mm along the Z-Axis. The
Sign in to leave a comment
Sign in