Thingiverse
Anet A8 MKS SBASE 1.3 Mount
by svhb
18
Downloads
15
Likes
0
Makes
Mounting plate to attach MKS SBASE V1.3 controller board to Anet A8 type printers.
The two smaller holes are for small sheet metal screws. Alternatively you may tap these to M3 and use an M3 machine screw. If using this method, be very careful with the tapping, it is very easy to strip the hole. (If you do strip the hole, it can be salvaged by sticking a thin strip of scrap plastic in the hole before inserting the screw).
The larger holes are meant to have screws go through the printer with
The two smaller holes are for small sheet metal screws. Alternatively you may tap these to M3 and use an M3 machine screw. If using this method, be very careful with the tapping, it is very easy to strip the hole. (If you do strip the hole, it can be salvaged by sticking a thin strip of scrap plastic in the hole before inserting the screw).
The larger holes are meant to have screws go through the printer with
Sign in to leave a comment
Sign in