DIY 3D Printed DJI Phantom 3 Water Landing Gear

This is a DIY land gear system for your DJI Phantom 3 drone. You can 3D print this off, assemble and purchase the following below. Here is a video demonstrating the water landing. Not responsible for any damage to your drone when using this lander gear.
https://youtu.be/H2A9k-21roI
Cut the rods to 9 inches.

4=12mm x 500mm carbon fiber rods on ebay
6=#6-32 1.25" bolts
4=#6-32 1" bolts
10=#6-32 nuts
4=velcro straps

All this for under $35.