Bigger Z-axis stabilizer bracket

Bigger bracket to attach your 20mm extrusion to table and support Z-axis to stay in 90° angle and stabilizing Z-axis.

Holes are designed for M4 screws with 10mm OD washers.

Can be printed with 200x200 mm bed, barely. Make sure your bed alignment is correct as the print size is very close to 200x200 mm.

**UPDATE 14 Feb 2017:**

I noticed the screw holes weren't aligned same way on both ends, updated STL file. At the same time, made attachment flange a bit thicker.

**UPDATE 23 Feb 20