Thingiverse
Hexacopter Flea 1
by fsimon12
64
Downloads
36
Likes
1
Makes
Big hexacopter for Gopro.
I built this hexacopter to carry my Gopro on a gimbal. It is very powerful and stable, the motor distance center to center is 672mm.
All the tubes are 18mm carbon fiber. The arms and the landing gear are 250mm long, the legs are 160mm long. The tubes to carry the battery and gimbal are 10mm carbon fiber and I used some O-rings for the mounts.
I started with a APM 2.6, standard and small 2212 920KV motors and I ended up with Gartt ML4108 500KV motor and a Pixhawk cont
I built this hexacopter to carry my Gopro on a gimbal. It is very powerful and stable, the motor distance center to center is 672mm.
All the tubes are 18mm carbon fiber. The arms and the landing gear are 250mm long, the legs are 160mm long. The tubes to carry the battery and gimbal are 10mm carbon fiber and I used some O-rings for the mounts.
I started with a APM 2.6, standard and small 2212 920KV motors and I ended up with Gartt ML4108 500KV motor and a Pixhawk cont
Sign in to leave a comment
Sign in