Thingiverse
PanelDue 7 inch display enclosure and mount
by trevmas
126
Downloads
61
Likes
2
Makes
This my enclosure design for a PanelDue with 7 inch touch screen display.
Details of the PanelDue can be found at:-
http://escher3d.com/pages/order/products/product2.php
To enable the box to be printed on a 200mm wide printer the controller is mounted on the case lid behind the display. You will need a short M-F ribbon cable to do this. The cables are readily available as Raspberry Pi GPIO extenders.
The disadvantage of this is that to access the reset and erase buttons you need to remo
Details of the PanelDue can be found at:-
http://escher3d.com/pages/order/products/product2.php
To enable the box to be printed on a 200mm wide printer the controller is mounted on the case lid behind the display. You will need a short M-F ribbon cable to do this. The cables are readily available as Raspberry Pi GPIO extenders.
The disadvantage of this is that to access the reset and erase buttons you need to remo
Sign in to leave a comment
Sign in