FeeYoung - FatShark 600TVL Rotating Camera Mount

This allows you to mount the FatShark TVL600 (or similar) FPV camera so it can be rotated by a servo on the FeeYoung ZX-250 quad frame. The flange is printed 0.2mm wider with a 0.5mm support. Once printed and cooled, you have to twist the flange to break it free. A few twists back-and-forth will loosen it up so it can act as a bearing. The right side flange is printed flat and can be slid on after the print is complete. More cools stuff @ Plastibots (http://www.plastibots.com/index.php/2016