Thingiverse
Cubelets GoPro camera adapter
by gpvillamil
11
Downloads
12
Likes
0
Makes
This is an adapter to connect a GoPro camera to robots built with the [Cubelets](http://www.modrobotics.com/cubelets/) system from Modular Robotics.
You will need a washer with a 1" outside diameter and a 1/2" inside diameter. If you have a different washer, you can change the dimensions in the OpenSCAD but be aware that you can't go much beyond the 1" OD because then the connector won't mate with the connector on other Cubelets.
Refer to the "Wheels for Cubelets" thing for more detailed a
You will need a washer with a 1" outside diameter and a 1/2" inside diameter. If you have a different washer, you can change the dimensions in the OpenSCAD but be aware that you can't go much beyond the 1" OD because then the connector won't mate with the connector on other Cubelets.
Refer to the "Wheels for Cubelets" thing for more detailed a
Sign in to leave a comment
Sign in